Inter-Harz GmbH

PROCESSING OF PLASTISOLS

Spread Coating Dip Coating
Rotation Moulding
Lid Seals – Coil Seals
PLASTICISER FOR VISCOSITY REDUCTION
EPOXY PLASTICIZER
PLASTICIZER FOR LOW TEMPERATURE APPLICATIONS
PLASTICIZER FOR HIGH TEMP APPLICATIONS
POLYMERIC PLASTICIZER
PIGMENT DISPERSANT
ANTISTATIC AGENT
 

PLASTIZISER FOR VISCOSITY REDUCTION
PASTE THINNER
EDENOL 190 Viscosity depressantdosage 3-8 %
SURFACE ACTIVE PASTE THINNER
LOXIOL DP
LOXIOL 3204
LOXIOL 3366
EPOXY PLASTICIZER
EDENOL D 81Epox. sojabeanoil6,3-7,0 Epoxycont.
EDENOL D 82Epox. sojabeanoil,
better organoleptic
6,3-7,0 Epoxycont.
LOW TEMP AND HIGH TEMP PLASTICIZER
POLYMERIC PLASTICIZER
EDENOL P 460Polyglyc. Estergood low temp. prop.
EDENOL 888 Di-octyl-sebacate low temp plasticizer
EDENOL DBSDi-butyl-sebacateexcel. low temp. applic.
EDENOL DIDADi-isodecyl-sebac.low temp and long term
EDENOL 1200Polymeric plastic.
high viscosity
good resistance to
extraction and migration
EDENOL 1215Polymeric plastic.
low viscosity
good resistance to
extraction and migration
EDENOL 1230Polymeric plastic.
medium viscosity
good resistance to
extraction and migration
PIGMENT DISPERSANT
LOXIOL G 10 Vdispersant of pigments, slight increase of dilatance,
improved levelling after the coating knife
RELEASE AGENT
LOXIOL G 71 Sdosage 0,3 %, calculated on PVC + plasticizer
LOXIOL G 73dosage up to 0,5 % on PVC + plasticizer

Because of the multiple types and qualities of the plastic raw materials, the wide range of processing methods and the variety of demands regarding the properties of the finished products, it is impossible to provide specific recommendations of the use of any individual product mentioned above.

 
We recommend to contact us. Our technical service will provide further information.